LOADpro finds these problems FAST:
- High Corrosive Resistance
- Short To Ground
- Open Circuit
LOADpro Test Leads load the circuit to see if the current can flow. By loading the circuit, LOADpro makes a voltage drop test "on the fly"
Just press the switch - the test results can not lie.
Use LOADpro with your DMM and follow our test method - you will find wiring faults quicker
LOADpro Test Leads feature SteadyPin Probe Tips, which allows the probe to sit firmly on a male ECM or connector pin
LOADpro are OEM approved - finds corroded circuits fast!
The process is very simple - just read the voltage. It's that easy, really. If a vehicle component is inoperable, just unplug the connector. Read voltage at the connector. Do you see 12 volts? If yes, press the LOADpro switch - if the voltage remains, the wiring is good - go on to something else. If the voltage drops - the circuit has high resistance.... i.e. - corroded wiring or connections. If you see no voltage initially, you have an open or short to ground.
LOADpro Test Leads also feature SteadyPin Probe Tips. instead of a pointed probe, SteadyPin tips have a small recess at the tip that allows the probe to sit firmly on a male ECM or connector pin. Traditional pointed probes fail to give an effective connection and create difficulties in completing manufacturer-specific voltmeter tests.
We recommend replacing your existing test leads with LOADpro and leave them in place.
NOTE - LOADpro Dynamic Test Leads and the 200 page book "Fundamental Electrical Troubleshooting" are available in a bundle. See part #181 for this combination.
WATCH: FET Electrical Book for Mechanics
WATCH: LOADpro Dynamic Voltmeter Leads
WATCH: LOADpro Works