180 LOADpro Dynamic Test Leads

Our Price $78.49

LOADpro finds these problems FAST:

  1. High Corrosive Resistance
  2. Short To Ground
  3. Open Circuit

LOADpro Test Leads load the circuit to see if the current can flow. By loading the circuit, LOADpro makes a voltage drop test "on the fly"

Just press the switch - the test results can not lie.

Use LOADpro with your DMM and follow our test method - you will find wiring faults quicker

LOADpro Test Leads feature SteadyPin Probe Tips, which allows the probe to sit firmly on a male ECM or connector pin

LOADpro are OEM approved - finds corroded circuits fast!

The process is very simple - just read the voltage. It's that easy, really. If a vehicle component is inoperable, just unplug the connector. Read voltage at the connector. Do you see 12 volts? If yes, press the LOADpro switch - if the voltage remains, the wiring is good - go on to something else. If the voltage drops - the circuit has high resistance.... i.e. - corroded wiring or connections. If you see no voltage initially, you have an open or short to ground.

LOADpro Test Leads also feature SteadyPin Probe Tips. instead of a pointed probe, SteadyPin tips have a small recess at the tip that allows the probe to sit firmly on a male ECM or connector pin. Traditional pointed probes fail to give an effective connection and create difficulties in completing manufacturer-specific voltmeter tests.

We recommend replacing your existing test leads with LOADpro and leave them in place.

NOTE - LOADpro Dynamic Test Leads and the 200 page book "Fundamental Electrical Troubleshooting" are available in a bundle. See part #181 for this combination.

WATCH: FET Electrical Book for Mechanics

WATCH: LOADpro Dynamic Voltmeter Leads

WATCH: LOADpro Works

WATCH: Technicans Talk about LOADpro